IntrepidXJ's Adventure Weblog

Added some gussets to my cage tonight, since I am waiting for some more parts and steel before I can really get working on this thing again

Got rid of my beat up roller fairlead

….for a new hawse fairlead

I always hit my roller fairlead, so I wanted something smaller (besides, I had hit the roller one so much, that it didn’t roll anymore anyways).

Once I build my new front bumper later this summer, it will offer even better approach angle

Here’s a few pics I took today at the Terra Jeep Club Show & Shine. Enjoy.

More here:

http://myxj.net/g2/v/2006_Trips/terra/

finished the passenger side door bar today

kicked out for maximum room

I have landed on my tube doors too many times, causing the hinges to get messed up, preventing the doors from closing easily and properly……so it is time for them to go.

In place of them I am adding door bars to my cage. I started on the driver’s side today. Here’s a few pics.

from the inside

outside

I added two bends to kick the bar out as far as possible for maximum room

from behind

After my trip to Moab and Colorado I noticed that I had hit my rockers hard enough to buckle my floor a little. So I have started working on tying the rockers and cage into the framerail.

I started out by making some wedges

The wedges will sit up against the bottom of the floor between the rocker and the framerail (which is plated with 3/16″ steel).

I will have 3 of these on each side. The front and rear ones will bolt through the floor and through the plates welded to the floor that my cage is welded to

The middle one on each side will just be welded to the rocker and framerail

Once all the wedges are welded in place, they will be covered with 3/16″ plate so the bottom is smooth and the wedges will not get caught on rocks, etc….

More pics as I progress

I can’t believe I forgot to post this pic!

might as well post some other pics from the trip as well now.

the nice snowstorm i ran into

wally working on his hyrdo assist

On the way home from Moab, I met up with the Best of the West event and ran Carnage Gulch with them near Buena Vista. It was a very fun and challenging trail.

the trail lived up to it’s name

sent to me from Formatt

My final day in Moab was spent on Kane Creek Canyon. This is a fun and very scenic trail, with plenty of water crossings.

We got stuck oln this trail most of the day also, but because there was an ATV accident, and they stopped us so they could get a helicopter to land in the canyon. It was an interesting sight

Moved to the side:

It’s not everyday you can get a pic of your Jeep in a canyon with a helicopter behind it

We were supposed to run Behind the Rocks, but due to lack of interest, we decided to head up to Poison Spider. With just 3 of us, we flew through this trail pretty quickly.

Since we flew through PSM, we headed off for a quick scenic drive up Long Canyon